Gas Spring & Mounts

Gas Spring – TU, TL, X, TX, XG, CU, M2, EP3 etc.

Special Mounts

K, L, HM, HMF, SA, FAC, SW, RM/RMX, FCSC, FC, FSL, FSS, NMP, FFL, FRM Special Mounts

Gas Links System

Connecting one or more gas springs to form a Link System with a common gas pressure may often be advantageous from a press technique and/or safety perspective.

Flex Cam

Flex Cam is used for piercing, cutting, forming and flanging operations. The system allows for a flexible distribution of forces with optimal direction and velocity. By using a Flex Cam, fewer tools are required in production.

Controllable Gas Springs-KF2

Controllable Gas Spring – KF2 (patented product) can be locked in their bottom position and where the return stroke of the spring can be controlled.

Flange stripper LT, LW

KALLER Flange Stripper Unit (or lifter) is to be used in flanging dies, for lifting up the part after flanging operations.

Roller Cam RC2, RCP2

Roller Cam is used for piercing, trimming, flanging and restriking. The Roller Cam can be mounted in both vertical and horizontal angles.

Hose less Baseplate

KALLER Hose-less Baseplate is the increasingly popular easy-accessible alternative to the conventional hosed plate systems on the market.

DS Gas Spring

Using the DS springs is an excellent way to avoid unnecessary wear of the die, press and gas springs.

Low Contact Force – LCF

Brochure on our gas spring that reduces press maintenance, lowers noise levels, and increases production rates.

Stock Lifters SLME 170, SLMT 170, SLM 300, SPC 800

KALLER Stocklifters SLME 170, SLMT 170 and SLM 300 gas springs are mainly for use in progressive dies. The extremely robust design can withstand high side loading.

SPC Gas springs

KALLER Speed Control™ -SPC Gas Springs, these new springs have been engineered to reduce or eliminate blank holder bounce.

Soft-Hit Striker Plate – SSP

Soft-hit Striker Plate (SPP) have been engineered to address three of the major problems that face metal stampers: – Excessive shock loads – High noise levels – Poor part quality

Dual Post Lifters DPL 90, DPL 200

KALLER Dual Post Lifters, DPL 90 and DPL 200, can be used in progressive dies for lifting the stock when it progresses through the die.

Pressure Tank

Pressure Tanks are used together with the EO24-Hose system (or its equivalent) in applications where a low pressure/force build-up in the Hose System is advantageous (e.g. for deep draw tooling applications).

Gas Spring and Mounts

Gas Spring – NP, NPL, T2, T3, T3T, T3F etc

Tanker

TNKT, TNKS, TNK XP, TNK HS

Hose Link System

Dualseal 24, EZ, Micro24, O-Ring Face Seal

Nitro Cam

HCPU, HCCU, HCF, HCCF

Controllable Gas Spring CS2

HYSON offers multiple pad delay solutions to reduce spring back and part deformation without interfering with automation.

Manifold System

HYSON, a global leader in manifold design and manufacturing since 1964, manufactures manifold systems to your specifications, or can engineer a system for you.

NDS Gas Spring

Available in forces from 30,000 N (6,750 lbf) to 75,000 N (16,860 lbf), NDS (Die separation springs) gas springs assure the gap between the upper and lower die.

Smooth return Spring SRS

 SRS springs also reduce shock loading inside the die. The SRS Series are ideal for part position control in fast return stroke applications in transfer presses or line dies.

Stock Lifter

T2SLT, T2SLE, T2SLM, T2SRL, T2DPL

Low Contact Force Strike Plate

LCF-SP

T.ON / Punches

Punches, Button Dies, Pilots, Retainers by Toolingsystem

Wear Plates(SP, F), Cam Upper Plates, Cam Dwell Plates, Cam Bottom Plates etc.

Guide Bush, Guide Post, Clamp, Guide Bar etc.

Blocks, Stripper Bolts, Keys, Spring Plunger, Dowel Pins etc.

Gauges, Sensor Gauges, Switch and Cable, Locating Cone etc.

Roller Carrier Sets, Roller Guide Sets, Scrap Chutes, Lifters etc.

Lifting Pins, Cast-In Bolts etc.

.

Spring Rams, Spring Guide Retainers, Return Spring Units etc.

Light Load, Midium Load, Heavy Load Springs etc.

Unit Cam